ʻO Tungsten Carbide Surface Milling Inserts No nā Aluminum ingots Mīkini Kiʻi Hōʻikeʻike

ʻO Tungsten Carbide Surface Milling Inserts No ka Aluminum ingots Mīkini

ʻO ka wehewehe pōkole:

Ka Mana Nui
—E hoʻokō i nā koi pololei, e hōʻoia i ka pololei a me ka pololei.

'O'ole'a ki'eki'e a me ka ha'iha'i kū'ē
—E hōʻoia i ka paʻa a me ka hilinaʻi.

Ke Kaʻina Hana Sintering Hot Isostatic Pressing (HIP).
—Material like ʻole ka paʻa, me ka ʻoihana kiʻekiʻe.

Hana 'Otomatika Ki'eki'e
—Ka maikaʻi paʻa, hoʻomaikaʻi nui i ka pono.

Kākoʻo no nā ʻano kikoʻī like ʻole a me nā koho koho
- Ka hoʻolako ʻana i nā pono like ʻole, hāʻawi i nā ʻano koho.

E hoʻouna i ka leka uila iā mākou

Huahana Huahana

wehewehe

ʻOki Milling Face No ka Aluminum Ingot

Nānā Huahana:
Hoʻolālā ʻia ka ʻoki wili alo alumini no ka wili ʻana ma mua o ka ʻōwili wela
ke kaʻina hana o nā alumini ingots.The alumini mea alo wili ʻoki moʻo e pili ana i ka ʻōkeke
nā mea ʻoki wili, nā mea ʻoki wili pololei, a me nā mea ʻoki wili i uhi ʻia
hoʻohana ʻia no ka wili nui o nā blanks koʻikoʻi
ʻO ka maʻalahi o ka ʻili o nā alumini.

Nā hiʻohiʻona huahana:
1, ʻOi ka wili wili, e loaʻa ana i kahi maʻemaʻe ma luna o ka ingot alumini wili, me ka maikaʻi.
paʻa kaʻina hana.
2、 He kiʻekiʻe kiʻekiʻe a paʻa ka ʻili, hāʻawi i ka hopena maikaʻi loa a me ka pale ʻana.3、ʻO ka ʻili o ka ʻili he maikaʻi maikaʻi, e hōʻoiaʻiʻo ana i kahi kaʻina wili ʻole a me ke ahi ʻole.

ʻOki Milling Rough:

Kauoha Kauoha	Ana (mm
Kauoha Kauoha	L	R	d	S	s1
JT6206-L	37.4	3	7	8	2

Kauoha Kauoha	Ana (mm)
Kauoha Kauoha	L	R	S	S1	S2	d	d1
JT6206-M	30	3	8	2.4	0.65	8.2	7.2

Hoʻopau Milling Cutter:

Kauoha Kauoha	Ana (mm)
Kauoha Kauoha	L	L1	R	R1	S	S1	d
JT6027	37.4	37.08	3	730	8	2	7.4

ʻOki wili i uhi ʻia:

Papa Papa

Papa	ISO Code	Nā Pono Mechanical Kino (≥)			Palapala noi
Papa	ISO Code	ʻO ka mānoanoa g/cm3	Paʻakiki (HRA)	TRS N/mm2	Palapala noi
YG3X	K05	15.0-15.4	≥91.5	≥1180	He kūpono no ka hana pololei ʻana i ka hao a me nā metala non-ferrous.
YG3	K05	15.0-15.4	≥90.5	≥1180
YG6X	K10	14.8-15.1	≥91	≥1420	He kūpono no ka mīkini pololei a me ka semi-finishing o ka hao a me nā metala non-ferrous, a me ka hana ʻana i ke kila manganese a me ke kila kinai.
YG6A	K10	14.7-15.1	≥91.5	≥1370
YG6	K20	14.7-15.1	≥89.5	≥1520	He kūpono no ka hoʻoheheʻe ʻana a me ka mīkini ʻokiʻoki o ka hao hao a me nā ʻāpana māmā, a hiki ke hoʻohana ʻia no ka mīkini paʻakikī o ka hao a me ke kila kila haʻahaʻa.
YG8N	K20	14.5-14.9	≥89.5	≥1500
YG8	K20	14.6-14.9	≥89	≥1670
YG8C	K30	14.5-14.9	≥88	≥1710	He kūpono no ka hoʻokomo ʻana i nā ʻāpana wili pōhaku rotary impact a me rotary impact rock drilling bits.
YG11C	K40	14.0-14.4	≥86.5	≥2060	He kūpono no ka hoʻokomo ʻana i nā ʻāpana niho ʻōniʻoniʻo a i ʻole conical no nā mīkini ʻeli pōhaku kaumaha no ka hoʻoponopono ʻana i nā hana pōhaku paʻakikī.
YG15	K30	13.9-14.2	≥86.5	≥2020	He kūpono no ka ho'āʻo tensile o nā kaola kila a me nā paipu kila ma lalo o nā lakio hoʻoemi kiʻekiʻe.
YG20	K30	13.4-13.8	≥85	≥2450	He kūpono no ka hana ʻana i nā dies stamping.
YG20C	K40	13.4-13.8	≥82	≥2260	He kūpono no ka hana ʻana i ke anu anuanu a me ke kaomi anu i make no nā ʻoihana e like me nā ʻāpana maʻamau, nā bearings, nā mea hana, etc.
YW1	M10	12.7-13.5	≥91.5	≥1180	He kūpono no ka mīkini pololei a me ka semi-hoʻopau ʻana o ke kila kuhiliʻole a me ke kila kila maʻamau.
YW2	M20	12.5-13.2	≥90.5	≥1350	He kūpono no ka semi-hoʻopau ʻana o ke kila kila a me ke kila kila haʻahaʻa.
YS8	M05	13.9-14.2	≥92.5	≥1620	He kūpono no ka hana pololei ʻana i nā mea hao, nickel-based kiʻekiʻe-mehana, a me ka ikaika kiʻekiʻe.
YT5	P30	12.5-13.2	≥89.5	≥1430	He kūpono no ka ʻoki ʻana i ke kila a me ka hao.
YT15	P10	11.1-11.6	≥91	≥1180	He kūpono no ka mīkini pololei a me ka semi-finishing o ke kila a me ka hao.
YT14	P20	11.2-11.8	≥90.5	≥1270	He kūpono no ka mīkini kikoʻī a me ka semi-finishing o ke kila a me ka hao, me ka helu hānai haʻahaʻa.Hoʻolālā kūikawā ʻia ʻo YS25 no nā hana wili ma ke kila a me ka hao.
YC45	P40/P50	12.5-12.9	≥90	≥2000	He kūpono no nā mea hana ʻoki kaumaha, e hāʻawi ana i nā hopena maikaʻi loa i ka hoʻohuli ʻino ʻana o nā hoʻoheheʻe ʻana a me nā mea hao kila like ʻole.
YK20	K20	14.3-14.6	≥86	≥2250	He kūpono no ka hoʻokomo ʻana i nā ʻāpana wili pōhaku rotary impact a me ka wili ʻana i nā ʻano pōhaku paʻakikī.